SLIO

Category:
Descripción

Presenting the completely new developed I/O system SLIO®, VIPA once again sets new standards in the automation industry.

By means of the modular and extremely compact SLIO the realization of almost every automated solution will from now on be simpler and especially more economical.

SLIO can be combined and applied with each of the established VIPA systems 100V, 200V, 300S, 500S.

It´s one of the most effective and modern decentralized I/O systems available on the market. It combines high functionality with a clever mechanic concept in an extremely compact design.

Features

Compact and Space-Saving Design

  • Conceptual separation of electronic and installation layer
  • Space-saving, thin design
  • Innovative staircase-shaped wiring layer
  • Simple “Two components set-up”

Clever Labeling and Diagnostic Concept

  • Clear allocation and readability of channel states
  • Simple, time-saving installation and maintenance by means of the connector pin assignment provided on the module
  • Clear, definite labeling of channels
  • Reference designator label remains on the exchange of a module

Installation and Maintainability

  • “Permanent Wiring” enables the exchanging without the disconnection of the wiring
  • Intelligent slide and plug mechanism for a simple handling
  • Electronic is protected against reverse polarity
  • Encoding of the electronic modules prevents from incorrect plugging

High performance

  • Quick backplane bus concept of 48MBit/s
  • With ETS modules it is possible to switch exactly up to +-1us independent of fieldbus.

New: 16-fold digital in- and output modules for the proven I/O- and control system SLIO

The new SLIO 16-fold digital in- and output modules with the part numbers 021-1BH00 and 022-1BH00 are available now. With a width of only 13 mm, they are particularly space-saving and can be used flexibly thanks to their modular design, consisting of a basic module and a removable connector. Push-in technology makes wiring particularly easy.

VIPA_021-1BH00 VIPA_022-1BH00

Properties part number 021-1BH00:

16 digital inputs 16xDC 24V *

Wiring without wire ferrules: 0.5-0.75 mm2 /AWG 24-18 *

Wiring with wire ferrules: 0.14-0.75 mm2 /AWG 25-18 *

Properties part number 022-1BH00:

16 digital outputs 16xDC 24V 0,5A *

Wiring without wire ferrules: 0.5-0.75 mm2 /AWG 24-18

Wiring with wire ferrules: 0.14-0.75 mm2 /AWG 25-18

For manuals and documentation please refer to Productflyer

The new SLIO Safety-Module with the article number 021-1SD10 and 022-1SD10 is now available.

The safety modules support FSoE (FailSafe over EtherCAT) and can be used together with the EtherCAT interface module 053-1EC01 as a slave on an EtherCAT FSoE master.

SLIO CPU 019-CEFPM00 SLIO CPU 019-CEFPM00

Properties 021-1SD10

4 digital Inputs isolated to the backplane bus, SDI 4xDC 24V

Status indication of the channels via LEDs

Safety module with automatic disconnection in case of error according toIEC 61508 SIL3 and EN ISO 13849-1, Cat.4 / PL e

FSoE (FailSafe over EtherCAT) with EtherCAT Interface-Modul 053-1EC01: Firmware 2.0.0 and up, ESI file V005 and up

Properties 022-1SD10

digital outputs isolated to the backplane bus, SDO 4xDC 24V 0.5A

Status indication of the channels via LEDs

Safety module with automatic disconnection in case of error according to IEC 61508 SIL3 and EN ISO 13849-1, Cat.4 / PL e

FSoE (FailSafe over EtherCAT) with EtherCAT Interface-Modul 053-1EC01: Firmware 2.0.0 and up, ESI file V005 and up

New: SLIO CPU 019-CEFPM00

The new SLIO PLC 019PN, with the article number 019-CEFPM00, is now available! With the CPU 019PN the system SLIO is extended upwards in the matter of memory and performance and offers the customer a high perfor-mance platform for current applications and future functions and features.

SLIO CPU 019-CEFPM00

Features:

Including OPC UA Server * and WebVisu **

Including PROFINET Controller and PROFINET I-Device *

Including PROFIBUS master/slave *

PROFINET MRP client and topology recognition

Programmable with SPEED7 Studio, Simatic Manag-er and TIA-Portal

Integrated work memory 6MByte

PROFINET interface: 2Ports (as a switch), up to 128 PN devices, up to 24 productive connections,

PG/OP interface: 2Port switch, up to 4 productive con-nections, DHCP client

RS485 interface: PROFIBUS master/slave, MPI,USS master, ASCII, STX/ETX, 3964(R), Modbus master/slave